[Fix] M.2 SSD Not Showing Up in BIOS (100% Working)

Isn’t your m.2 SSD not showing up on your pc? This article outlines the symptoms of a non-recognized SSD, as well as the different causes & step-by-step remedies. SSDs are well-known for their performance and quality, and so many users prefer to upgrade their computers by replacing their hard drives with SSDs. However, occasionally the recently installed SSD is not correctly detected. There are a variety of factors that can contribute to the issue, but here are a few actions you should do to resolve it on your pc.

How to Resolve – ‘M.2 SSD Not Showing Up in BIOS’

Why the Error Occurs

The issue of an sd card not being identified in Windows 10, and also older Windows operating systems, might put individuals in a frustrating predicament. They are unable to add files and information to the SSD, yet they can access the material that already exists on it. As a result, the most pressing concern is how to resolve the m.2 ‘SSD not showing up’ problem as simply and fast as possible.

I’ve compiled a list of four scenarios in which SSDs fail to appear in Windows 10 and Windows 11, and I’ll explain how to resolve each one. When it becomes important to recover documents from an unreadable or formatted SSD, EaseUS Data Recovery Wizard Free should be downloaded.

Furthermore, free third-party partitioning administrator software, such as EaseUS Partition Master, can perform many of the same functions as Windows Disk Management, such as altering drive symbols & locations, initializing hard disks, including reformat hard drive segments, without requiring a license. In comparison to Disk Management, the benefits of employing third-party applications lie in its simplicity of use.

Case 1. SSD Is Not Showing up as This Drive Letter Is Absent or Clashing With Another Drive Letter.

It is possible that your m.2 SSD is not showing up as this drive alphabet of such SSD is absent or is in dispute with some other drive, as well as the Windows operating system is unable to identify it as such. This issue can be fixed by manually allocating a very new drive letter to the SSD using Windows Disk Management.

To assign the SSD a new drive letter, simply follow these steps:

Step 1: First, you have to right-click on “This PC” on your computer, from there, you have to choose “Manage”. And, then you have to click on the “Disk Management” option. You will find the option in the Storage section.

Step 2: Then, you have to right-click on the SSD partition table and hit on the “Change Drive Letter and Paths…”.

Step 3: There, you will find the Add, Change and Remove options. You have to click on the “Change” option, and then, you have to pick one drive letter using the menu. Then, you have to click on the “OK” to save the changes.

Case 2. Since This SSD Has Not Been Initialized, It Is Not Visible.

The “uninitialized” status of a new SSD is most likely the reason why it won’t appear in Windows Explorer when you first install it. Before the Logical Disk Manager will access an SSD, it is necessary to initialize the disk. 

This is the very same reason why an outdated SSD will display the “drive unknown, not initialized” warning message. In each of these cases, you can begin to repair the problem by connecting the SSD to some other working system and seeing if it returns the same error as before. However, you will be required to configure the SSD inside Windows 10 before using it.

For initializing your SSD, you have to follow the steps below:

Step 1: First, you have to search for the Disk Management on your pc and open it. 

Step 2: Then, you have to look for the SSD which one you need to initialize, and you have to right-click on it and select the “Initialize Disk” from the drop-down menu.

Step 3: Once, you enter the Initialize Disk window, you have to choose the disk(s) for initializing. You have the option of using either the master boot record (MBR) or the GUID partition table (GPT) as your partition type. 

Case 3. SSD Is Not Showing up Since This Storage Device Is Not Recognized by the Operating System.

If the two procedures described here do not succeed for you, you will need to consider other options. One possibility is whether the system software has become damaged, or that Operating systems do not accept the existing file system, among other possibilities. 

As a result of the investigation, the applicable system files problems are primarily presented as ‘RAW’, or ‘Free space’, even or ‘Unallocated space’, respectively. It would be sufficient to reinstall the disk to resolve the file system difficulties.

Caution

Performing a disk formatting operation will delete all info on the storage. If you haven’t already done so, you can recover data first from formatted SSD by downloading the free EaseUS Data Recovery Wizard.

Step 1. First, you have to scan your SSD.

Pick the disk designated as SSD on the EaseUS Data Recovery Wizard screen, and then hit the “Scan” option and start the process of recovery.

Step 2. Then, you have to see the results. Whenever the scan process is complete, use the “Filter” or even “Search” buttons to locate any missing SSD data.

Step 3. Then, you have to recover your SSD card. For this, you have to select the file you want to recover and click on the “Recover” button.

Case 4. Ssd Not Showing up Because of Disk Driver Issues

Another possibility is that the SSD has been recognized, however, it is not shown in “My Computer.” This is since the disk drive was not properly mounted. Consequently, you can attempt to reinstall your SSD driver to see if this resolves the problem.

Step 1: First, you have to right-click on the “This PC” on your computer and hit on the “Manage”. You will find the option inside the System Tools panel, and there, you have to click on the “Device Manager”.

Step 2: Then, you have to navigate to the Disk drives. It should provide a list of the storage media that is linked to your computer.

Step 3: Now, you have to right-click on the SSD and then, choose the “Uninstall device” from the drop-down menu.

Step 4: Finally, you have to remove the SSD from your computer and restart it. Reconnect the SSD to your computer once more to see if Windows 10 recognizes it as a regular drive.

Frequently Asked Questions

1. Why is your m.2 SSD not showing up?

One of the primary reasons is a problem with the driver. In the same way that a hard drive is identified but does not appear in Your Pc, the SSD is often not recognized since the disk drivers are not correctly installed. As a result, you can try reinstalling the SSD drivers to see if that helps to resolve the problem.

2. How do I get my new SSD to show up?

If you get a new SSD and it won’t show up in Windows Disk Management, it’s likely in an uninitialized state. You must initialize a disk before the Logical Disk Manager can access it.

Conclusion

SSDs, as well as any other type of storage medium, are susceptible to potential failure including significant damage over time. You must make preparations in advance to protect the information stored on these storage disks. The practice of creating a backup will always be recommended. Taking steps to preserve a backup of hard drive material to the other secure position, such as backup storage, cloud storage, or network drive. EaseUS Todo Backup Free is a free tool that can assist you in creating a complete hard disk backup.